Other SteelSelect Sites :
SteelSelect
Product Listing
go back
LYSAGHT FITFAST® Gutter (Quick Find reference no. 481) LYSAGHT®
Overview
LYSAGHT FITFAST® gutter suits Queensland’s demanding weather, withstanding baking sun and torrential rain.The high face front also conceals the ends of roof sheeting, and is custom cut to length, leaving a neater appearance with fewer joins, which saves you time on site. The LYSAGHT FITFAST® gutter also has overflow slots helping to prevent water back up into the eaves.
  • Easy installation
  • Low maintenance
  • Manufactured locally for quick turnaround
  • Range of accessories available
Note:
  • Available in Queensland only
  • It is important gutters slope towards the outlets (a minimum gutter fall of 1 in 500 is recommended). Without this slope, ’ponding’ may occur, reducing the life of your gutter
  • When installing gutters, remove any metal particles or debris at the end of the day to prevent staining or corrosion
  • Do not install galvanised gutters with a ZINCALUME® steel or COLORBOND® prepainted steel roof. Galvanised gutters are only suitable with galvanised steel roof
  • The protective plastic film should be stripped off immediately on installation
Availability
This product is listed in the following states:
QLD
This is a guide only, please contact the manufaturer direct to confirm availability
* denotes By Enquiry
Associated products: LYSAGHT EMLINE® Gutter and Capping | LYSAGHT TRIMLINE® Gutter | LYSAGHT® Half Round Gutter and LYSAGHT® Flat Back Gutter | LYSAGHT SHEERLINE® Gutter and Capping | LYSAGHT OGEE® Gutter | LYSAGHT® QUAD Gutter | LYSAGHT RANCE® Gutters | LYSAGHT® QUAD 125 Square Bead Gutter(WA) | LYSAGHT® Half Round Gutter (WA) | LYSAGHT RANCE® Gutters | LYSAGHT® QUAD Gutter Hi-front 115 (QLD) | LYSAGHT® QUAD Gutter Lo-front 150 (QLD) | LYSAGHT® QUAD Gutter 175 (QLD) | LYSAGHT® Half Round Gutter (Nth QLD) | LYSAGHT® Half Round Gutter (Sth QLD) | LYSAGHT® Flat Back Gutter (Nth QLD) | LYSAGHT® Flat Back Gutter (Sth QLD) | LYSAGHT SHORELINE™ Gutter
SpecWriter: Create a specification for LYSAGHT FITFAST® Gutter
Material Choices:

IMPORTANT: This is a guide only, for material availability please contact the rollformer direct or visit www.lysaght.com

Material Gauges
COLORBOND® steel 0.42 BMT
ZINCALUME® steel 0.42 BMT
COLORBOND® Ultra steel 0.42 BMT
COLORBOND® Stainless steel 0.42 BMT
COLORBOND® Metallic steel 0.48 BMT
Material Selection Guidelines
Reference table for selecting a material grade in a marine environment - This table is intended to serve as a GUIDE ONLY. It is essential to consult with BlueScope Steel Direct for advise on the most suitable choice of COLORBOND® steel and ZINCALUME® steel product.
NATSPEC BlueScope Steel branded worksheets

Why specify ‘Base Metal Thickness (BMT) over ‘Total Coated Thickness’ (TCT)
The base thickness of some building materials can be described as BMT – base metal thickness. Product thickness has been, in isolated instances, nominated as ‘TCT’ total coated thickness.
This can be misleading and should not be used in specifications. For more information;
Download technical Bulletin TB14 – Builders Guide to Australian steel sheet and strip standards

Tools / Content
Dimensions
Create a Specification
Product Brochures
CAD Profiles

Warranty

LYSAGHT® Product Performance Warranty brochure

warranty application

Compliance

Create with Confidence - Australian Guaranteed Standards



Brochures - View more LYSAGHT brochures Top of Page
File Type Thumbnail Name/Description File Size Download

PDF File
LYSAGHT® Rainwater Solutions Queensland brochure
Contents:
  • LYSAGHT® Quad Gutters (115, 150, 175)
  • LYSAGHT TRIMLINE® Gutter
  • LYSAGHT EMLINE® Gutter
  • LYSAGHT FITFAST® Gutter
  • LYSAGHT® Half Round Gutter
  • LYSAGHT® Flat Back GUTTER
  • LYSAGHT NOVALINE® Fascia
  • LYSAGHT® Downpipes & Accessories
  • LYSAGHT® Rainheads & Tradework

Dated added/updated: 04/03/15
1,694  KB  
 


CAD Profiles - View more LYSAGHT CAD files Top of Page
File Type Thumbnail Name/Description File Size Download
 

DWG
FITFAST® Gutter CAD file - QLD
Use the FITFAST® Gutter profile directly in your designs.
Dated added/updated: 04/07/16
167  KB  

Revit
Fitfast® Gutter (QLD) CAD file
Use the Fitfast® Gutter (QLD) profile directly in your designs.
Dated added/updated: 10/03/10
164  KB  

DXF
Fitfast® Gutter (QLD) CAD file
Use the Fitfast® Gutter (QLD) profile directly in your designs.
Dated added/updated: 01/03/10
30  KB  

ArchiCAD
Fitfast® Gutter (QLD) CAD file
Use the Fitfast® Gutter (QLD) profile directly in your designs.
Dated added/updated: 04/03/10
15  KB  

SketchUp
SketchUp Component Library for Eaves Guttering - LYSAGHT® Content
A collection of LYSAHT® eaves gutter profiles converted into .skp format. Link the folder to SketchUp and drag the profiles into your models. Use the “Follow Me” tool to extrude the section - Package now includes dynamics to change material to ZINCALUME® and COLORBOND® steel colours.
Dated added/updated: 21/02/14
1,738  KB  
 
Renders - Flat Colour Swatches Top of Page
File Type Thumbnail Name/Description

ZIP
COLORBOND® steel colour swatches
COLORBOND® Ultra steel colour swatches
COLORBOND® Stainless steel colour swatches
COLORBOND® Metallic steel colour swatches
COLORBOND® Coolmax™ steel colour swatches

ZIP
ZINCALUME® steel texture

ZIP
TRUECORE® steel texture