Other SteelSelect Sites :
SteelSelect
Product Listing
go back
LYSAGHT KLIP-LOK CLASSIC® 700 (Quick Find reference no. 534) LYSAGHT®
Overview
LYSAGHT KLIP-LOK CLASSIC® 700 features improved rib strength for excellent spanning capacity. Visually, a strong rib makes a bold statement rising from flat pans with longitudinal fluting. Clips permit thermal expansion of long, straight runs, and because there are no piercings through the cladding; the long, straight lines of LYSAGHT KLIP-LOK CLASSIC® 700 remain crisp and clean. And no piercings means superb weatherproof performance.
  • Wide cover concealed-fixed cladding with no exposed fasteners for weathertight roofs
  • Excellent water carrying capacity
  • Strong rib makes bold visual statement
  • Easy-to-install fixing clip means roof can be laid faster and more economically
  • Can be used on walls
  • Please Note: LYSAGHT KLIP-LOK CLASSIC® 700 is only available upon enquiry in some states.
Note:
  • Minimum recommended roof pitch is 1 degree (1 in 50) for 0.48 BMT, and 2 degrees (1 in 30) for 0.42mm BMT
Min Roof Pitch
0.48 BMT: 1 degrees
0.42 BMT: 2 degrees
Sheet Coverage
700mm
Availability
This product is listed in the following states:
SA, WA
This is a guide only, please contact the manufaturer direct to confirm availability
* denotes By Enquiry
Associated products: LYSAGHT KLIP-LOK® 406 | LYSAGHT KLIP-LOK 700 HI-STRENGTH® | LYSAGHT LONGLINE 305®
SpecWriter: Create a specification for LYSAGHT KLIP-LOK CLASSIC® 700
Material Choices:

IMPORTANT: This is a guide only, for material availability please contact the rollformer direct or visit www.lysaght.com

Material Gauges
COLORBOND® steel 0.42 BMT, 0.48 BMT
ZINCALUME® steel 0.42 BMT, 0.48 BMT
COLORBOND® Ultra steel 0.42 BMT, 0.48 BMT
COLORBOND® Stainless steel 0.42 BMT
COLORBOND® Metallic steel 0.48 BMT
COLORBOND® Coolmax® steel 0.42 BMT, 0.48 BMT
Material Selection Guidelines
Reference table for selecting a material grade in a marine environment - This table is intended to serve as a GUIDE ONLY. It is essential to consult with BlueScope Steel Direct for advise on the most suitable choice of COLORBOND® steel and ZINCALUME® steel product.
NATSPEC BlueScope Steel branded worksheets

Why specify ‘Base Metal Thickness (BMT) over ‘Total Coated Thickness’ (TCT)
The base thickness of some building materials can be described as BMT – base metal thickness. Product thickness has been, in isolated instances, nominated as ‘TCT’ total coated thickness.
This can be misleading and should not be used in specifications. For more information;
Download technical Bulletin TB14 – Builders Guide to Australian steel sheet and strip standards

Tools / Content
Dimensions
Calculate product weight
Create a Specification
Product Brochures
CAD Profiles
Textures / Flat Swatches

Warranty

LYSAGHT® Product Performance Warranty brochure

warranty application

Compliance

Create with Confidence - Australian Guaranteed Standards



Brochures - View more LYSAGHT brochures Top of Page
File Type Thumbnail Name/Description File Size Download

PDF File
LYSAGHT® Roof & Wall Flashing - Architectural Detailing Manual
Architectural Detailing Manual.
Dated added/updated: 08/05/14
3,367  KB  

PDF File
LYSAGHT® Residential Roofing Brochure
Overview of LYSAGHT® residential roofing profiles and availability.
Dated added/updated: 26/04/16
5,175  KB  

PDF File
Roofing & Walling Installation Manual 2015-2016
A guide to the installation of steel roofing and walling manufactured by LYSAGHT®.
Dated added/updated: 08/10/15
4,390  KB  

PDF File
LYSAGHT LOK-KLIP® KL CLASSIC Design and Install Guide
The LYSAGHT LOK-KLIP® KL CLASSIC system is the fast and effective solution for weather resistant end and expansion joints. Its low profile design means that you no longer need to obviously interrupt the visual impact of the bold ribs and flat pans of a LYSAGHT KLIP-LOK® roof, should a long-length roofing design solution be required.
Dated added/updated: 27/04/16
1,486  KB  

PDF File
LYSAGHT® Walling Brochure
Overview of LYSAGHT® walling profiles and availability.
Dated added/updated: 26/04/16
4,527  KB  

PDF File
LYSAGHT® Cyclonic Design Manual Steel Roofing, Walling & TOPSPAN®
This 32 page Cyclonic Area Design Manual Using Topspan Profiles and LYSAGHT® roofing and walling claddings - has been prepared to assist architects, engineers and builders in the correct specification and installation of LYSAGHT TOPSPAN® profiles and roofing & walling claddings in cyclonic areas. It is a supplement to the LYSAGHT® Roofing & Walling Installation Manual and individual product brochures, and should be used in conjunction with those publications.
Dated added/updated: 05/03/15
4,807  KB  

PDF File
KLIP-LOK CLASSIC® 700 brochure
LYSAGHT KLIP-LOK CLASSIC® 700 features improved rib strength for excellent spanning capacity. Visually, a strong rib makes a bold statement rising from flat pans with longitudinal fluting. Clips permit thermal expansion of long, straight runs, and because there are no piercings through the cladding; the long, straight lines of LYSAGHT KLIP-LOK CLASSIC® 700 remain crisp and clean. And no piercings means superb weatherproof performance.
Dated added/updated: 04/03/15
1,387  KB  
 


CAD Profiles - View more LYSAGHT CAD files Top of Page
File Type Thumbnail Name/Description File Size Download
 

DWG
KLIP-LOK 700 Classic® CAD file
Use the KLIP-LOK 700 Classic® profile directly in your CAD designs.
Dated added/updated: 29/08/16
183  KB  

Revit
COLORBOND® steel Texture Library for Revit 2013/2014/2015 - LYSAGHT Content (LATEST COLOUR PALLETTE) - Version 6
Package includes the latest COLORBOND® Metallic steel colours; Cosmic™, Galactic™, Rhea™, Astro™, Aries™ and Celestian™. Includes flat colour swatches, all profiles now include a ZINCALUME® steel texture. Installation instructions are included with this download.
Dated added/updated: 21/10/14
12,805  KB  

Revit
Revit 2013 Roofing & Walling profile line library - LYSAGHT content
Create 2-D continuous profile lines, created for Revit 2013. note: Some adjustments to the lapping has occurred to turn the profile into a line, if the profile is critical, refer the rollformers documentation. The profile line was created in Revit, no dwg profiles were imported. The profile lines include the flip option.
Dated added/updated: 18/03/14
3,022  KB  

Revit
Revit 2014 Roofing & Walling profile line library - LYSAGHT content
Create 2-D continuous profile lines, created for Revit 2014. note: Some adjustments to the lapping has occurred to turn the profile into a line, if the profile is critical, refer the rollformers documentation. The profile line was created in Revit, no dwg profiles were imported. The profile lines include the flip option.
Dated added/updated: 18/03/14
3,000  KB  

Revit
KLIP-LOK 700 Classic® CAD file
Use the KLIP-LOK 700 Classic® profile directly in your CAD designs.
Dated added/updated: 15/10/12
228  KB  
 


Profiled Texture Downloads Top of Page
File Type Thumbnail Name/Description File Size Download
 

ZIP
KLIP-LOK 700 CLASSIC® textures (BMP format)
KLIP-LOK 700 CLASSIC® COLORBOND® steel textures - 29 colours (including COLORBOND® Metallic and COOLMAX® steel colours) and ZINCALUME® steel.
Dated added/updated: 20/10/14
381 KB  
 
Renders - Flat Colour Swatches Top of Page
File Type Thumbnail Name/Description

ZIP
COLORBOND® steel colour swatches
COLORBOND® Ultra steel colour swatches
COLORBOND® Stainless steel colour swatches
COLORBOND® Metallic steel colour swatches
COLORBOND® Coolmax™ steel colour swatches

ZIP
ZINCALUME® steel texture

ZIP
TRUECORE® steel texture