Other SteelSelect Sites :
SteelSelect
Product Listing
go back
LYSAGHT CUSTOM ORB ACCENT® 35 (Quick Find reference no. 539) LYSAGHT®
Overview
The LYSAGHT CUSTOM ORB ACCENT® range is an exciting addition to the iconic BlueScope Lysaght family of corrugated roofing and walling profiles. With two deeper profiles set to become the new design standard in Australian roofing and walling, LYSAGHT CUSTOM ORB ACCENT® allows architects and designers to create a bolder corrugated roof line.
  • Can be used for both roofing and walling applications
  • Available in our four most popular standard COLORBOND® steel colours, with a wide variety of other colours available via special order
  • Deeper ribs means greater spanning capacity and resistance to damage
  • Greater water carrying capacity allows for uses at lower minimum pitches
Note:
  • LYSAGHT CUSTOM ORB ACCENT® 35 may be used on roof pitches as low as 2 degrees
  • LYSAGHT CUSTOM ORB ACCENT® 21 may be used on roof pitches as low as 3 degrees
Min Roof Pitch
2 degrees
Sheet Coverage
724mm
Availability
This product is listed in the following states:
NSW, VIC, QLD, ACT
This is a guide only, please contact the manufaturer direct to confirm availability
* denotes By Enquiry
Associated products: LYSAGHT CUSTOM BLUE ORB® | LYSAGHT CUSTOM ORB® | LYSAGHT FLATDEK® | LYSAGHT SPANDEK® | LYSAGHT TRIMDEK® | LYSAGHT CUSTOM ORB ACCENT® 21 | LYSAGHT CUSTOM ORB ACCENT®
SpecWriter: Create a specification for LYSAGHT CUSTOM ORB ACCENT® 35
Material Choices:

IMPORTANT: This is a guide only, for material availability please contact the rollformer direct or visit www.lysaght.com

Material Gauges
COLORBOND® steel 0.48 BMT
ZINCALUME® steel 0.48 BMT
COLORBOND® Ultra steel 0.48 BMT
COLORBOND® Metallic steel 0.48 BMT
Material Selection Guidelines
Reference table for selecting a material grade in a marine environment - This table is intended to serve as a GUIDE ONLY. It is essential to consult with BlueScope Steel Direct for advise on the most suitable choice of COLORBOND® steel and ZINCALUME® steel product.
NATSPEC BlueScope Steel branded worksheets

Why specify ‘Base Metal Thickness (BMT) over ‘Total Coated Thickness’ (TCT)
The base thickness of some building materials can be described as BMT – base metal thickness. Product thickness has been, in isolated instances, nominated as ‘TCT’ total coated thickness.
This can be misleading and should not be used in specifications. For more information;
Download technical Bulletin TB14 – Builders Guide to Australian steel sheet and strip standards

Tools / Content
Dimensions
Create a Specification
Product Brochures
CAD Profiles
Textures / Flat Swatches

Warranty

LYSAGHT® Product Performance Warranty brochure

warranty application

Compliance

Create with Confidence - Australian Guaranteed Standards


Feature Projects

Back to the future - ACCENT® 35 - LYSAGHT® media release



Brochures - View more LYSAGHT brochures Top of Page
File Type Thumbnail Name/Description File Size Download

PDF File
LYSAGHT® Roof & Wall Flashing - Architectural Detailing Manual
Architectural Detailing Manual.
Dated added/updated: 08/05/14
3,367  KB  

PDF File
LYSAGHT® Residential Roofing Brochure
Overview of LYSAGHT® residential roofing profiles and availability.
Dated added/updated: 26/04/16
5,175  KB  

PDF File
LYSAGHT CUSTOM ORB ACCENT™ 35 Design Install Guide
With corrugations 60% deeper and 50% wider than traditional corrugated profiles LYSAGHT CUSTOM ORB ACCENT™ 35 is ideally suited to the large cladding areas in modern industrial, commercial, residential and recreational buildings.
Dated added/updated: 02/05/16
767  KB  

PDF File
LYSAGHT CUSTOM ORB ACCENT® 35 Cyclonic Areas Addendum
This document is to be read in conjunction with the LYSAGHT® Cyclonic Area Design Manual current at the time of publication.
Dated added/updated: 28/04/16
142  KB  

PDF File
LYSAGHT® Walling Brochure
Overview of LYSAGHT® walling profiles and availability.
Dated added/updated: 26/04/16
4,527  KB  
 


CAD Profiles - View more LYSAGHT CAD files Top of Page
File Type Thumbnail Name/Description File Size Download
 

DWG
CUSTOM ORB ACCENT™ 35 CAD file
Use the CUSTOM ORB ACCENT™ 35 profile directly in your CAD designs.
Dated added/updated: 29/08/16
182  KB  

Revit
Revit 2013 Roofing & Walling profile line library - LYSAGHT content
Create 2-D continuous profile lines, created for Revit 2013. note: Some adjustments to the lapping has occurred to turn the profile into a line, if the profile is critical, refer the rollformers documentation. The profile line was created in Revit, no dwg profiles were imported. The profile lines include the flip option.
Dated added/updated: 18/03/14
3,022  KB  

Revit
Revit 2014 Roofing & Walling profile line library - LYSAGHT content
Create 2-D continuous profile lines, created for Revit 2014. note: Some adjustments to the lapping has occurred to turn the profile into a line, if the profile is critical, refer the rollformers documentation. The profile line was created in Revit, no dwg profiles were imported. The profile lines include the flip option.
Dated added/updated: 18/03/14
3,000  KB  
 


Profiled Texture Downloads Top of Page
File Type Thumbnail Name/Description File Size Download
 

ZIP
CUSTOM ORB ACCENT® 35 textures (BMP format)
CUSTOM ORB ACCENT® 35 COLORBOND® steel textures - 29 colours (including COLORBOND® Metallic and COOLMAX® steel colours) and ZINCALUME® steel.
Dated added/updated: 13/10/14
269 KB  
 
Renders - Flat Colour Swatches Top of Page
File Type Thumbnail Name/Description

ZIP
COLORBOND® steel colour swatches
COLORBOND® Ultra steel colour swatches
COLORBOND® Stainless steel colour swatches
COLORBOND® Metallic steel colour swatches
COLORBOND® Coolmax™ steel colour swatches

ZIP
ZINCALUME® steel texture

ZIP
TRUECORE® steel texture